This adjusts the timing of the sync pulse in relation to the dark time transition on the DMDs.
Use the default value of 0 as a starting point.
Configure the projector for the 3D source
1. Select the channel (from the Home tab) best suited for the 3D source.
2. To select the correct EDID timing, go to Main menu > Image Settings > EDID Timing
Select and select the required EDID timing.
3. Connect all the required cables between the 3D source and the projector.
4. Configure your 3D source.
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
View 3D Content
38