Table of Contents
Advertisement
Connect a video source via DVI
The Dual Link DVI Input Card (DDIC) accepts digital video data from DVI sources. Various input
configurations are supported; however, the VGA port is not supported.
Input
Configuration
Four-Port
Enables connection of four DVI cables to four DDIC cards. Each DVI
input supplies one quadrant of a 4K input image. This configuration
supports high resolution and high frame rate input video streams.
Single One-Port
Enables connection of one DVI cable to the DVI input of a DDIC
card (in any slot). In this configuration, the DVI input supplies the
entire video raster.
One-Port, Dual-
May be used for Dual-Input 3D configurations.
Input 3D
Only one Four-Port input configuration is available for DVI inputs. For information on the
video quadrant mapping for the DDIC four-point input configuration, see
32.
Dual Link DVI Input
Four-port input video quadrant mappings
Video quadrant mapping can change depending on the type of cards used for the Four-Port input
configurations.
3GIC, TDPIC, THIC cards
The following table shows the video quadrant mappings for the 3GIC, TDPIC and THIC Four-Port
input configurations:
Four-Port Input Configuration (1)
Slot 1
1-In
Slot 1
2-In
Slot 2
1-In
Slot 2
2-In
Four-Port Input Configuration (2)
Slot 3
1-In
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
Description
PWR
1 - Dual Link DVI-I
Top left
Bottom left
Top right
Bottom right
Top left
Analog
Digital
2 - VGA
Add Devices
Requirements
Four DDIC cards
One DDIC card
Two DDIC cards
DDIC card
on page
Signal
31
Advertisement
Table of Contents
