Table of Contents
Advertisement
Input
Configuration
Single One-Port
Enables connection of one DisplayPort cable to the 1-IN input of a
TDPIC card (any slot). In this configuration the DisplayPort input
supplies the entire video raster.
One-Port, Dual-
May be used for Dual-Input 3D configurations.
Input 3D
For limitations of one card use for One-Port Dual-Input 3D, see
connectivity
Connect a video source via 3G-SDI
The 3G Input Card (3GIC) accepts digital video data from HD- and 3G-SDI (Serial Digital Interface)
sources. Various input configurations are supported.
Input
Configuration
Four-Port
Enables connection of four SDI cables to two 3GIC cards (using
the 1-IN and 2-IN inputs of two cards in slots 1 and 2, or in slots
3 and 4). Each SDI input supplies one quadrant of a 4K input
image. This configuration supports high resolution and high frame
rate input video streams, including both 2D and 3D direct inputs.
Four-Port, Dual-
May be used for Dual-Input 3D configurations. For information on
Input 3D
the video quadrant mapping for the 3GIC four-point input
configuration, see
page 31.
Single One-Port
Enables connection of one SDI cable to the 1-IN input of a 3GIC
card (in any slot). In this configuration the SDI input supplies the
entire video raster.
One-Port, Dual-
May be used for Dual-Input 3D configurations.
Input 3D
3GIC does not support 120 Hz framerate. For limitations of one-card use for One-Port Dual-
Input 3D, see
connectivity
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
Description
on page 51 and
Mirage 4KLH signal connectivity
Description
Four-port input video quadrant mappings
D4KLH60 signal connectivity
on page 51.
D4KLH60 signal
on page 51.
Two 3GIC cards
Four 3GIC cards
on
One 3GIC card
One or two 3GIC cards
on page 51 and
Mirage 4KLH signal
Add Devices
Requirements
One TDPIC card
One or two TDPIC
cards
Requirements
29
Advertisement
Table of Contents
