Connect Devices
Ethernet Setup
Ethernet is setup to obtain an IP address automatically if there is a DHCP server on the network. To
modify IP settings, or manually enter an address:
1. Tap Menu Tab > Configuration > Ethernet Settings > Modify IP Settings.
2. Set the network information for the projector:
•
To obtain information automatically from the network, tap Automatic.
•
To manually enter the network information, tap Manual and enter the IP Address,
Subnet Mask and Gateway (optional).
3. Click Ok.
28
D4K2560/ Mirage 4K25 User Manual
020-101076-02 Rev. 1 (11-2013)