Table of Contents
Advertisement
Connect a video source using HDMI
The Twin HDMI Input Card (THIC) accepts digital video data from HDMI sources. Various
configurations are supported.
Input
Configuration
Four-Port
Enables connection of four HDMI cables to two THIC cards (using
the 1-IN and 2-IN inputs of two cards in slots 1 and 2, or in slots 3
and 4). Each HDMI input supplies one quadrant of a 4K input
image. This configuration supports high resolution and high frame
rate input video streams, including both 2D and 3D direct inputs.
Maximum framerate is 60 Hz.
Four-Port, Dual-
May be used for Dual-Input 3D configurations. For information on
Input 3D
the video quadrant mapping for the THIC four-point input
configuration, see
page 31. Maximum framerate is 120 Hz.
Single One-Port
Enables connection of one HDMI cable to the 1-IN input of a THIC
card (in any slot). In this configuration, the HDMI input supplies the
entire video raster. Maximum framerate is 60 Hz.
One-Port, Dual-
May be used for Dual-Input 3D configurations. Maximum framerate
Input 3D
is 120 Hz.
For limitations of one-card use for One-Port Dual-Input 3D, see
connectivity
Twin HDMI Input
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
Description
Four-port input video quadrant mappings
on page 51 and
Mirage 4KLH signal connectivity
Add Devices
Requirements
Two THIC cards
Four THIC cards
on
One THIC card
One or two THIC cards
D4KLH60 signal
on page 51.
30
Advertisement
Table of Contents
