Introduction; General Safety Precautions - Christie D4KLH60 Mirage 4KLH User Manual

Laser projection system
Hide thumbs Also See for D4KLH60 Mirage 4KLH:
Table of Contents

Advertisement

Introduction

This manual is intended for professionally trained operators of the Christie Laser Projection System.
These operators are qualified to replace the lens and external air filters, but should not attempt to
install or service the projector.
Failure to comply with the following could result in death or serious injury.
• The components of the Christie Laser Projection System are designed and certified to
• Only Christie qualified technicians who are knowledgeable about the hazards associated

General safety precautions

When working with the projector, observe these important safety rules to avoid personal injury or
damage to the projector:
When accessing a restricted access location for projector service or maintenance, avoid
exposure to the projector beam path by making sure to
• Turn the projector power off and disconnect the projector from AC power.
• Rotate the Beam Stop to Closed.
Failure to comply results in death or serious injury.
Failure to comply with the following could result in death or serious injury.
• The projection head must use Christie laser modules and Laser Rack.
• Never look directly into the projector lens. The extremely high brightness can cause
• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the
Position all cables where they cannot contact hot surfaces or be pulled or tripped over.
Failure to comply could result in minor or moderate injury.
• This projector must be operated in an environment that meets the operating range
• When using the Christie laser projection system, your installation must comply with all
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
work together as a unit. Christie components should never be used with third-party
components. Use of non-Christie components with Christie systems may pose safety
concerns and void your warranty.
with laser use, high-voltage and high temperatures generated by the projector are
authorized to assemble, install, and service the Christie Laser Projection System.
permanent eye damage.
concentrated light beam of the projector.
specification. See
Projector Specifications
federal, state, and municipal safety regulations.
on page 50.
7

Advertisement

Table of Contents
loading

Table of Contents