Retrieve Log File; Change User Levels - Christie D4KLH60 Mirage 4KLH User Manual

Code Description
S File System (SD card)
E Red enclosure
R Red laser
G Green laser
B Blue laser
I Interlock
P Power-up
4. To open a status pane for a particular laser module, click the corresponding quick status panel.
5. To view the alarm type and state, click the Alarms tab.
6. To view the current ambient temperature and warning and alarm thresholds, click the Ambient
tab.
7. To view bus voltage levels, click the Buses tab.
8. To view laser module build, software, and use data, click the Info tab.

Retrieve log file

1. Under Screens, click System > Status.
2. in the Logs group in the Start date list, select the earliest day you want data from.
3. In the End date list, select the last day you want data from.
4. Click Get Logs.

Change user levels

1. Click System and under Access Level, click Change.
2. Select the user level you want.
User
Operator
Advanced
Administrator
Service
Engineering
Factory
Status
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
Permissions
View laser module status and retrieve log files.
Create and save configurations for channels. Plus actions from lower level.
Deactivate and activate a laser device. Plus actions from lower levels.
Change alarm thresholds, laser output. Disable and enable two of the five fans.
Update firmware. Change some register settings. Plus actions from lower level.
Christie Digital access only.
Christie Digital access only.
Unused.
Laser Bank Control Application
40