Saved Image Quality; Image Saving - Nikon DS-L4 Instructions Manual

Microscope camera control unit
Hide thumbs Also See for DS-L4:
Table of Contents

Advertisement

16.4

Saved Image Quality

Symptom
The saved image size is too
small.
The overlay information cannot be
read because the resolution of an
acquired image is low.
An image is not captured at the
desired moment even if the live
image is temporarily frozen.
16.5

Image Saving

Symptom
An image cannot be saved onto
the recording media.
The saved image cannot be
read.
Chapter 16
Possible Cause
The image mode (control mode of the
image pickup device) is set other than
[FULL].
The screen capture mode ([SCREEN
CAP MODE]) is enabled.
A small image size has been set.
The image file type is set to BASIC.
The resolution of the saved image is low.
The refresh frequency of the live image
is slow.
Possible Cause
The recording media is not inserted
correctly.
The inserted microSD card is not
supported.
The microSD card or USB memory drive
is not formatted.
The type of recording media is not
supported by the DS-L4.
The free space remaining on the
recording media is insufficient.
The save folder is set incorrectly.
The settings of the save folder and the
playback folder are incorrect.
The recording media is damaged.
175
Troubleshooting
Change the image mode with settings that provide a
high-definition image.
Turn off screen capture mode in the [STILL IMAGE
SETTING] menu of the [CAMERA MENU: SHOT/REC]
screen.
Change the image size to a larger size in the [STILL
IMAGE SETTING] menu of the [CAMERA MENU:
SHOT/REC] screen.
In the [STILL IMAGE SETTING] menu of the [CAMERA
MENU: SHOT/REC] screen, select TIFF as the file
type.
To use JPEG format, select NORMAL or FINE.
Change the image mode, image size, and file type
settings.
Select the image mode, and set the image size and file
type appropriately so that the image is refreshed at a
higher frequency (frame rate).
If you use a microSD card, insert it in the direct memory
slot of the tablet main body correctly. If you use a USB
memory drive, connect it to a USB port of the tablet
main body or cradle correctly.
Use a supported microSD card.
Use a microSD card or USB memory drive that has
been initialized.
Use a supported recording media.
Replace the media with media having sufficient free
space.
Increase the amount of free space by deleting
unnecessary images or moving them to other recording
media.
Make sure that the desired folder is set as the save
folder correctly.
Check that the folder is correctly set as a playback
folder.
Replace the recording media.
Action
Action

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents