Disable Snmp Port_Security_Violation Traps; Enable Snmp Rstpport_State_Change Traps - D-Link DES-1210-28/ME Reference Manual

Command: enable snmp port_security_violation traps
Success!
DES-1210-28/ME:5#

disable snmp port_security_violation traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SNMP port security violation traps support on the Switch:
DES-1210-28/ME:5# disable snmp port_security_violation traps
Command: disable snmp port_security_violation traps
Success!
DES-1210-28/ME:5#

enable snmp rstpport_state_change traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP RSTP port state change traps support on the Switch:
DES-1210-28/ME:5# enable snmp rstpport_state_change traps
Command: enable snmp rstpport_state_change traps
Success!
DES-1210-28/ME:5#
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
To disable SNMP port security violation traps.
disable snmp port_security_violation traps
The disable snmp port_security_violation traps command
disables SNMP port security violation traps on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To enable SNMP rstp port state change traps support on the Switch.
enable snmp rstpport_state_change traps
The enable snmp rstpport_state_change traps command enables
SNMP rstp port state change traps support on the Switch. After
enables the SNMP RSTP port state change traps support, the
Switch will send out a trap when the state of RSTP port is changed.
None.
Only Administrator or operator-level users can issue this command.
75