Disable Authen_Policy; Config Authen Application - D-Link DES-1210-28/ME Reference Manual

Parameters
Restrictions
Example usage:
To enable the authentication policy:
DES-1210-28/ME:5# enable authen_policy
Command: enable authen_policy
Success.
DES-1210-28/ME:5#

disable authen_policy

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the authentication policy:
DES-1210-28/ME:5# disable authen_policy
Command: disable authen_policy
Success.
DES-1210-28/ME:5#

config authen application

Purpose
Syntax
Description
Parameters
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
None.
Only Administrator or operator-level users can issue this command.
To disable the authentication policy on the Switch.
disable authen_policy
The disable authen_policy command disables the authentication
policy on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To configure various applications on the Switch for authentication
using a previously configured method list.
config authen application {console | http | ssh | all] [login |
enable] [default | method_list_name <string 15>]
The config authen application command configures Switch
applications (console, Telnet, SSH) for login at the user level and at
the administration level (authen_enable), utilizing a previously
configured method list.
application – Specifies the application to configure. One of the
following four options may be selected:
console – Configures the command line interface login
•
method.
http – Configures the http login method.
•
ssh – Configures the Secure Shell login method.
•
all – Configures all applications as (console, Telnet, SSH)
•
260