Restrictions
Example usage:
To add an entry from the DHCP server/client filter list in the Switch's database:
DES-1210-28/ME:5# config filter dhcp_server add permit server_ip
10.1.1.1 client_mac 00-00-00-00-00-01 ports all
Command: config filter dhcp_server add permit server_ip 10.1.1.1
client_mac 00-0
0-00-00-00-01 ports all
Success!
DES-1210-28/ME:5#
show filter dhcp_server
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the DHCP server filter list created on the switch:
DES-1210-28/ME:5# show filter dhcp_server
Command: show filter dhcp_server
IP Address
---------------
10.1.1.1
Total Entries: 1
Success!
DES-1210-28/ME:5#
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
Only administrator or operate-level users can issue this command.
Used to display current DHCP server/client filter list created on the
switch.
show filter dhcp_server
The show filter dhcp_server command is used to display DHCP
server/client filter list created on the switch.
None.
None.
MAC Address
-----------------
00-00-00-00-00-01 1-28
Ports
------------------------------
42