Config Igmp_Snooping Querier; Config Igmp_Snooping Querier_Selection - D-Link DES-1210-28/ME Reference Manual

config igmp_snooping querier

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the igmp snooping:

config igmp_snooping querier_selection

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
Success !
DES-1210-28/ME:5#
To configure IGMP snooping querier on the Switch.
config igmp_snooping querier [vlan_name <string 20> | vlanid
<vidlist> | all] state [enable | disable] {querier_version [IGMPv2 |
IGMPv3]}
The config igmp_snooping querier command enables IGMP
snooping querier on a specific VLAN.
vlan_name <string 20> − The name of the VLAN for which IGMP
snooping is to be configured. Up to 20 characters can be used.
vlanid <vidlist> − The VLAN id for which IGMP snooping is to be
configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
state [enable | disable] − Enables/Disables IGMP Snooping Querier.
querier_version [IGMPv2 | IGMPv3] − Specifies the IGMP Querier
version on the VLAN.
Only administrator or operator-level users can issue this command.
DES-1210-28/ME:5# config igmp_snooping querier vlanid 2 state enable
Command: config igmp_snooping querier vlanid 2 state enable
Success !
DES-1210-28/ME:5#
To configure IGMP snooping querier selection on the Switch.
config igmp_snooping querier_selection [vlan_name <string
20> | vlanid <vidlist> | all] state [enable | disable]
config
The
configures IGMP snooping querier selection on a specific VLAN.
vlan_name <string 20> − The name of the VLAN for which IGMP
snooping is to be configured. Up to 20 characters can be used.
vlanid <vidlist> − The VLAN id for which IGMP snooping is to be
configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
state [enable | disable] − Enables/Disables IGMP Snooping Querier.
Only administrator or operator-level users can issue this command.
igmp_snooping querier_selection
192
command