Delete Link_Aggregation; Config Link_Aggregation - D-Link DES-1210-28/ME Reference Manual

delete link_aggregation

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete link aggregation group:

config link_aggregation

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To define a load-sharing group of ports, group-id 2 with group members ports 1-5:
DES-1210-28/ME:5# config link_aggregation group_id 2 master_port 1 ports 1-5
Command: config link_aggregation group_id 2 master_port 1 ports 1-5
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
Success.
DES-1210-28/ME:5#
To delete a previously configured link aggregation group.
delete link_aggregation group_id <value 1-8>
The delete link_aggregation group_id command deletes a
previously configured link aggregation group.
group_id <value 1-8> − Specifies the group ID. The Switch allows up
to 8 link aggregation groups to be configured. The group number
identifies each of the groups.
Only administrator or operator-level users can issue this command.
DES-1210-28/ME:5# delete link_aggregation group_id 1
Command: delete link_aggregation group_id 1
LA channel 1 delete successful
DES-1210-28/ME:5#
To configure a previously created link aggregation group.
config link_aggregation group_id <value 1-8> master_port
<port 1-28> ports <portlist>
config
The
aggregation group created with the create link_aggregation
command above.
group_id <value 1-8> − Specifies the group ID. The Switch allows up
to 8 link aggregation groups to be configured. The group number
identifies each of the groups.
master_port <port 1-28> − Specifies a list of ports to belong to the
link aggregation group. Ports will be listed in only one aggregation
group and link aggregation groups can not overlap to each other.
The user must cofigure at list two ports in LAG.
ports <portlist> − Specifies a list of ports to belong to the link
aggregation group.
Only administrator or operator-level users can issue this command.
Link aggregation groups may not overlap.
link_aggregation
command
177
configures a link