Restrictions
Example usage:
To configure the user defined method list 'Permit' with authentication methods TACACS+, RADIUS and local_enable, in
that order.
DES-1210-28/ME:5# config authen_enable method_list_name Trinity method
tacacs+ radius local
Command: config authen_enable method_list_name Trinity method tacacs+ radius
local
Success.
DES-1210-28/ME:5#
delete authen_enable method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the user-defined method list 'Permit'
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
server_group <string 15> – Specifies the server group name
•
for authentication.
none – Specifies that no authentication is required to access
•
the Switch.
method_list_name <string 15> – Specifies a previously created
authen_enable method_list_name. The user may add one or more
of the following authentication methods to this method list:
tacacs+ – Specifies that the user is to be authenticated
•
using the TACACS+ protocol from a remote TACACS+
server.
radius - Specifies that the user is to be authenticated using
•
the RADIUS protocol from a remote RADIUS server.
local - Specifies that the user is to be authenticated using
•
the local user account database on the Switch. The local
enable password of the device can be configured using the
'config admin local_password' command.
server_group <string 15> –Specifies that the user is to be
•
authenticated using the server group account database on
the Switch.
none – Specifies that no authentication is required to access
•
the Switch.
Only Administrator or operator-level users can issue this command.
To delete a user-defined list of authentication methods for promoting
normal user level privileges to Administrator level privileges on the
Switch.
delete authen_enable method_list_name <string 15>
The delete authen_enable method_list_name command deletes a
user-defined list of authentication methods for promoting user level
privileges to Adminstrator level privileges.
<string 15> - The previously created authen_enable
method_list_name to be deleted.
Only Administrator or operator-level users can issue this command.
258