Show Stp Mst_Config_Id; Create Stp Instance_Id - D-Link DES-1210-28/ME Reference Manual

------------- --------
DES-1210-28/ME:5#

show stp mst_config_id

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MSTP configuration identification currently set on the Switch:
DES-1210-28/ME:5# show stp mst_config_id
Command: show stp mst_config_id
Name
Revision
Instance
--------
0
----------------------------------------------------------
DES-1210-28/ME:5#

create stp instance_id

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create instance id 2:
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
---
To display the MSTP configuration identification.
show stp mst_config_id
The show stp mst_config_id command displays the Switch's
current MSTP configuration identification.
None.
None.
[00-B2-FD-DA-EE-EB]
0
Vlans mapped
------------------------------------------
1-1024,1025-2048,2049-3072,3073-4094
To create instance ID on the Swiwtch.
create stp instance_id <value 1-15> [add_vlan <vidlist>|
remove_vlan <vidlist>]
The create stp instance_id command creates an instance ID of
STP on the Switch.
<value 1-15> - The value of the instance ID to be create.
<vidlist> - Specifies to add VLAN or delete VLAN of the specified
VID.
Only administrator or operator-level users can issue this command.
DES-1210-28/ME:5# create stp instance_id 1 add_vlan 2
Command: create stp instance_id 1 add_vlan 2
Success.
DES-1210-28/ME:5#
---- -------- ----
114