Show Lldp Local_Ports - D-Link DES-1210-28/ME Reference Manual

DES-1210-28/ME:5# show lldp ports 1
Port ID
------------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option :
DES-1210-28/ME:5#

show lldp local_ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the local port information for port 1 with mode brief:
DES-1210-28/ME:5# show lldp local_ports 1 mode brief
Command: show lldp local_ports 1 mode brief
Port ID : 1
---------------------------------------------
Port ID Subtype
Port ID
Port ID Desctiption
DES-1210-28/ME:5#
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
Port Description
Port Description
Port Description
Port Description
Enabled Management Address
(NONE)
Port VLAN ID
Enabled Port_and_Protocol_VLAN_ID
(None)
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status
Power Via MDI
Link Aggregation
Maximum Frame Size
To display the Link Layer Discovery Protocol (LLDP) configuration
that is advertised from a specific port.
show lldp local_ports {<portlist>} {mode[brief | normal |
detailed]}
The show lldp local_ports command displays the configuration that
is advertised from a specific port.
<portlist> − A port or range of ports to be displayed.
{mode[brief | normal | detailed]} − defines which mode of information
want to be displayed, brief, normal or detailed.
Only Administrator or operator-level users can issue this command.
: Interface Alias
: Slot0/1
: 1
: TX_and_RX
: Disable
: Ethernet Interface
278
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable