Config Igmp_Snooping - D-Link DES-1210-28/ME Reference Manual

Command
enable igmp_snooping
disable igmp_snooping
show igmp_snooping
show igmp_snooping
group
show igmp_snooping
forwarding
show igmp_snooping
host
show router_port
Each command is listed in detail, as follows:

config igmp_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the igmp snooping:
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
{multicast_vlan}
{multicast_vlan}
{vlan <vlan_name 20> | vlanid <vidlist> | multicast_vlan <vlan_name 32> |
multicast_vlan_group <vlan_name 32>}
[all | vlan_name <string 20> | vlanid <vidlist>] {data_driven}
{vlan <vlan_name 20>}
{vlan <vlan_name 20> | static | dynamic | forbidden}
To configure IGMP snooping on the Switch.
config igmp_snooping [vlan_name <string 20> | vlanid <vidlist>
| all] [host_timeout <sec 130-153025> | router_timeout <sec 60-
600> | leave_timer <sec 1-25> | fast_leave [enable | disable] |
state [enable | disable]]
The config igmp_snooping command configures IGMP snooping
on the Switch.
vlan_name <string 20> − The name of the VLAN for which IGMP
snooping is to be configured.
vlanid <vidlist> − The VLAN id for which IGMP snooping is to be
configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
host_timeout <sec 130-153025> − Specifies the maximum amount
of time a host can be a member of a multicast group without the
Switch receiving a host membership report. The default is 260
seconds.
router_timeout <sec 60-600> − Specifies the maximum amount of
time a route can be a member of a multicast group without the
Switch receiving a host membership report.
leave_timer <sec 1-25> − Leave timer. The default is 10 seconds.
fast_leave [enable | disable] − Enables or disables the fast leave.
state [enable | disable] − Enables or disables IGMP snooping for the
specified VLAN.
Only administrator or operator-level users can issue this command.
DES-1210-28/ME:5# config igmp_snooping default host_timeout 250 state
enable
Command: config igmp_snooping default host_timeout 250 state enable
191