Delete Cos Udp_Port_Mapping; Config 802.1P User_Priority - D-Link DES-1210-28/ME Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To display the CoS UDP port mapping on the Switch:

delete cos udp_port_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CoS UDP port mapping on the Switch:
DES-1210-28/ME:5# delete cos udp_port_mapping destination_port 500
Command: delete cos udp_port_mapping destination_port 500
Success!
DES-1210-28/ME:5#

config 802.1p user_priority

Purpose
Syntax
Description
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
show cos udp_port_mapping {destination_port <value 0-
65535>}
The show cos udp _port_mapping command is used to display
the CoS UDP port mapping information on the Switch.
<value 0-65535> - Specifies the mapped udp port information to be
displayed.
None.
DES-1210-28/ME:5# show cos udp_port_mapping
Command: show cos udp_port_mapping
UDP Port Class
--------------------------------
500 2
DES-1210-28/ME:5#
To delete the CoS UDP port mapping information on the Switch.
delete cos udp_port_mapping destination_port <value 0-65535>
The delete udp tcp_port_mapping command is used to delete the
CoS TCP port mapping information on the Switch.
<value 0-65535> - Specifies the mapped udp port information to be
deleted.
Only administrator or operator-level users can issue this command.
To map the 802.1p user priority of an incoming packet to one of the
four hardware classes of service available on the Switch.
config 802.1p user_priority <priority 0-7> <class_id 0-3>
The config 802.1p user_priority command configures the way the
Switch maps an incoming packet, based on its 802.1p user priority
tag, to one of the four hardware priority classes of service available
143