To display the aging time:
config multicast filter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure multicast filtering
show multicast filter port_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show multicast filtering settings:
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
DES-1210-28/ME:5#
DES-1210-28/ME:5# show fdb aging_time
Command: show fdb aging_time
Unicast MAC Address Aging Time = 300 (seconds)
DES-1210-28/ME:5#
To configure multicast filtering.
config multicast filter <portlist> [forward | filter]
The config multicast filtering_mode command enables filtering of
multicast addresses.
<portlist> - A port or range of ports to be configured.
forward - Forwards unregistered multicast packets.
filter - Filter unregistered multicast packets.
Only Administrator or operator-level users can issue this command.
DES-1210-28/ME:5# config multicast filter 3-5 forward
Command: config multicast filter 3-5 forward
Success!
DES-1210-28/ME:5#
To display multicast filtering settings on the Switch.
show multicast filter port_mode
The show multicast filter port_mode command displays the
multicast filtering settings.
None.
None.
DES-1210-28/ME:5# show multicast filter port_mode
Command: show multicast filter port_mode
Port
Multicast Filtering Mode
------
--------------------------------------------
1
Forward Unregistered Groups
2
Forward Unregistered Groups
123