Show Stp Ports - D-Link DES-1210-28/ME Reference Manual

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
STP Status
STP Version
Bridge Priority
Max Age
Hello Time
Forward Delay
TX Hold Count
Forward BPDU
Root Cost
Root Maximum Age
Root Forward Delay
Root Port
Root Bridge
DES-1210-28/ME:5#
Status 3: STP enabled for MSTP
STP Bridge Global Settings
------------------------------
STP Status
STP Version
Bridge Priority
Max Age
Hello Time
Forward Delay
TX Hold Count
Forward BPDU
Root Cost
Root Maximum Age
Root Forward Delay
Root Port
Root Bridge
DES-1210-28/ME:5#

show stp ports

Purpose
Syntax
Description
Parameters
: Enabled
: RSTP
: 32768
: 8
: 2
: 15
: 6
: Enabled
: 0
: 8
: 15
: 0
: 80:00:00:B2:FD:DA:EE:EB
: Enabled
: MSTP
: 32768
: 8
: 2
: 15
: 6
: Enabled
: 0
: 8
: 15
: 0
: 80:00:00:B2:FD:DA:EE:EB
To display the Switch's current instance_id configuration.
show stp ports {<portlist>}
The show stp ports command displays the STP Instance Settings
and STP Instance Operational Status currently implemented on the
Switch.
<portlist> – A port or range of ports to be configured. The port list is
specified by listing switch number and the beginning port number on
that switch, separated by a colon. Then the highest port number of
the range is specified. The beginning and end of the port list range
are separated by a dash.
112