Setting Up The Auto Iris; Rotate The Menu Sel Knob/Enter Button To; Align The Arrow Marker (C) With The Item To Be; Changed, And Push The Menu Sel Knob/Enter - Sony MEMORY STICK HDC-950 Operation Manual

4-6 Setup Using the OPERATION Menu
2

Rotate the MENU SEL knob/ENTER button to

display the ZEBRA/VF DTL page, and push the
MENU SEL knob/ENTER button.
ZEBRA/VF DTL page
<ZEBRA/VF DTL>
ZEBRA :c ON
:
ZEBRA1 :
ZEBRA2 : 100%
VF DTL :(
:( ON)
The current setting of each item appears to the
right of the item.
Item Contents
ZEBRA Sets zebra marker 1, zebra marker 2, or
both to ON or OFF.
ZEBRA1 Adjusts the zebra marker 1 (50 to 82%).
ZEBRA2 Adjusts the zebra marker 2 (88 to 112%).
VF DTL Sets VF detail to ON or OFF.
3
Rotate the MENU SEL knob/ENTER button to

align the arrow marker (c) with the item to be

changed, and push the MENU SEL knob/ENTER

button.

The arrow marker (c) will change into a "?" mark.

4
Rotate the MENU SEL knob/ENTER button to
change the setting to the desired value, and push
the MENU SEL knob/ENTER button.
The "?" mark will change back to the arrow
marker (c), and the new setting will be saved.
5
To set the values for another items, repeat steps 3
and 4.
6
To end menu operations, set the DISPLAY switch
to ON.
The menu display will disappear from the viewfinder
screen, and the status of items set to ON will be
displayed on the screen.
4-20(E)
Chapter 4 Adjustments and Settings for Recording
5
1
70%
0)

4-6-6 Setting up the Auto Iris

The AUTO IRIS page of the OPERATION menu is
used to set up items related to the auto iris.
1
Set the DISPLAY switch to MENU.
2
Rotate the MENU SEL knob/ENTER button to
display the AUTO IRIS page, and push the MENU
SEL knob/ENTER button.
AUTO IRIS page
<AUTO IRIS>
WINDOW :c 1
OVERRIDE :
The current setting of each item appears to the
right of the item.
Item Contents
WINDOW SEL Selects the auto iris windows
OVERRIDE Sets the override to temporarily change
the reference value for brightness of
the automatic iris level (–99 (one step
to fully closed iris) to 99 (one step to
fully open iris)).
a)The shaded parts in the illustrations below indicate the
area where light detection occurs.
1 2
3
Note
The override returns to 0 when you turn the camera
off, then on again.
3
Rotate the MENU SEL knob/ENTER button to
align the arrow marker (c) with the item you want
to set, and push the MENU SEL knob/ENTER
button.
The arrow marker (c) will change into a "?" mark.
6
0
a) (1 to 6).
6
4
5