Display/Menu Operations Section - Sony SRW-9000 Operation Manual

h Riser plate/focus reference mark (φ)
This is a plate for attaching movie accessories. It
has a mark to show the focus standard position. A
wrench (2.5 mm) for use in attaching and
detaching the viewfinder is stored inside. When
you want to use a tripod with the optional VCT-
14 Tripod Attachment, exchange the riser plate
for the supplied V-shoe plate.
See "To use the optional VCT-14 Tripod
Attachment" (page 34) for more information about
attaching the V-shoe plate.
i Assignable buttons 1 to 3
You can assign frequently used functions to these
buttons by menu settings. They are set to OFF
(disabled) when the unit is shipped from the
factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 50).

Display/Menu Operations Section

For details, see "Basic Operations in the
Subdisplay" (page 40) or "Basic Camera Menu
Operations" (page 111).
a VF MENU/DISPLAY button
Displays and hides menus in the subdisplay and
viewfinder.
b CANCEL/STATUS button
Cancels settings made in the subdisplay and
viewfinder, or returns the display to a previous
state. When the Camera menu is not displayed,
18 Locations and Functions of Parts
you can press this button to display information
about the status of the unit in the subdisplay and
viewfinder.
See "Viewing Settings and Indications in the
Viewfinder" (page 59) for details about the status
information that appears
c Subdisplay
Displays the Camera menu and unit settings. If
you are using the optional AP-1 Assistant Panel,
the same information appears in the subdisplay of
the AP-1.
d PAGE button
In subdisplay screens, switches to the next page
or confirms settings.
e MENU SEL (selection)/ENTER dial
In subdisplay and viewfinder screens, confirms
settings. When the Camera menu is displayed in
the subdisplay and viewfinder, turn the dial to
select menu items.
Note
When you turn the dial, stop it at a position where you
feel a click. If you force the dial to stop at a non-click
position, the operating stability of the dial on the AP-1
side may be affected.
f SET button
In subdisplay screens, returns to the previous
page. When this button is held down for one
second or longer, the screen enters settings
modification mode.