Display/Menu Operations Section - Sony SRW-9000 Operation Manual

setting on the <SUBDISPLAY 2> page (see page
88) of the Camera >USER (OPERATION) menu.
d Assignable 4/AUTO BLK BAL (auto
black balance) switch
Push the switch downward to the AUTO BLK
BAL side to start the auto black balance
adjustment.
You can use the Camera menu to assign a
function to the 4 position. This position is set to
OFF (disabled) when the unit is shipped from the
factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 48).
e RUN button and indicator
Starts and stops recording. The indicator lights
during recording, and flashes when low voltage or
an error is detected.
For more information about the indicator oprration,
see "Warning/Error Messages" (page 157).
f "Memory Stick" slot
Allows you to insert a "Memory Stick".
The access lamp lights in red while the unit is
writing or reading data to/from a "Memory
Stick". You can use "Memory Stick PRO" or
"Memory Stick PRO Duo" media with this unit.
("Memory Stick PRO Duo" media can be used
without any adaptor.)
Note
When the access lamp is lit in red, do not insert/remove
the "Memory Stick" or turn off the unit.
For details on "Memory Stick"media, see "Using a
"Memory Stick"" (page 146).
g Tripod screw holes
3
Two screw holes (for / -inch camera screws) are
8
provided on the bottom-side panel.
h Riser plate/focus reference mark (φ)
This is a plate for attaching movie accessories. It
has a mark to show the focus standard position. A
wrench (2.5 mm) for use in attaching and
detaching the viewfinder is stored inside. When
you want to use a tripod with the optional VCT-
14 Tripod Attachment, exchange the riser plate
for the supplied V-shoe plate.
See "To use the optional VCT-14 Tripod
Attachment" (page 34) for more information about
attaching the V-shoe plate.
i Assignable buttons 1 to 3
You can assign frequently used functions to these
buttons by menu settings. They are set to OFF
(disabled) when the unit is shipped from the
factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 48).

Display/Menu Operations Section

For details, see "Basic Operations in the
Subdisplay" (page 40) or "Basic Camera Menu
Operations" (page 89).
a VF MENU/DISPLAY button
Displays and hides menus in the subdisplay and
viewfinder.
b CANCEL/STATUS button
Cancels settings made in the subdisplay and
viewfinder, or returns the display to a previous
state. When the Camera menu is not displayed,
you can press this button to display information
about the status of the unit in the subdisplay and
viewfinder.
See "Viewing Settings and Indications in the
Viewfinder" (page 57) for details about the status
information that appears
c Subdisplay
Displays the Camera menu and unit settings. If
you are using the optional AP-1 Assistant Panel,
the same information appears in the subdisplay of
the AP-1.
Locations and Functions of Parts 17