Right Side - Sony SRW-9000 Operation Manual

e Power ON (])/OFF (1) switch and
indicator
Push the switch to the ON side to power the unit
on (the indicator lights). Push it to the OFF side to
power the unit off (the indicator goes out).
f EARPHONES jack and LEVEL knob
Use the jack to attach earphones or stereo
headphones equipped with a stereo miniplug, for
use in monitoring audio during recording and
playback. Adjust the audio level with the LEVEL
knob.
A warning sound is heard through the earphones
or headphones when an error occurs.
Note
Some L-type mini plugs cannot be connected. Use a
straight type mini plug.
For details on the warning tone, see "Warning
System" (page 155).
g AUDIO indicator
Lights when the audio level meters (see page 24)
exceed a certain level.
h HD SDI MON1 (HDSDI monitor output
1) connector (BNC type)
Output HDSDI signals for display on a monitor.
You can select the output signals in the Camera
menu (see page 53). The same signals are output
from the HD SDI MON2 connector on the rear
panel.
i EXT I/O (external control) connector
(5-pin)
Use the connector for control via RS-232C.
16 Locations and Functions of Parts

Right Side

Display/menu operations section (page 17).
a Assignable buttons 5 to 8
You can assign frequently used functions to these
buttons by menu settings. The following
functions are assigned when the unit is shipped
from the factory.
Switches Functions
5 STOP
6 PLAY
7 REW
8 F.FWD
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 48).
b Filter label and assignable buttons N
and C
The filter label show the filters selected by the
knobs of the front panel filter selector. You can
use the Camera menu to assign functions to
assignable buttons N and C. They are set to OFF
(disabled) when the unit is shipped from the
factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 48).
c LOCK switch
When slid to the right, locks the operation buttons
on the right-side panel.
If you wish, you can set this switch so that it locks
all buttons except the RUN button. Make this