Brake Light Switches; Checking The Front And Rear Brake Pads - Yamaha MT-10 2023 Owner's Manual

Brake light switches

The brake light should come on just be-
fore braking takes effect. The brake
light is activated by switches connected
to the brake lever and brake pedal.
Since the brake light switches are com-
ponents of the anti-lock brake system,
they should only be serviced by a
Yamaha dealer.
Periodic maintenance and adjustment
EAU36505
Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1. Brake pad wear indicator
Each front brake pad is provided with
wear indicators, which allows you to
check the brake pad wear without hav-
ing to disassemble the brake. To check
the brake pad wear, check the position
of the wear indicators while applying
the brake. If a brake pad has worn to
the point that a wear indicator almost
EAU22393 touches the brake disc, have a Yamaha
dealer replace the brake pads as a set.
Rear brake pads
EAU36891
1 1
1. Brake pad wear indicator groove
Each rear brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that a wear
indicator groove almost appears, have
a Yamaha dealer replace the brake
pads as a set.
8-22
1 1
1
2
EAU46292
3
4
5
6
7
8
9
10
11
12
13