Finisher Or Stacker Bottom Cover Removal - Lexmark C792 series Service Manual

Finisher or stacker bottom cover removal

See "Finisher/High-capacity output stacker assembly" on page 7-25
1.
Remove the option from the printer.
2.
Remove the standard output bin LED and LED lens. See
and LED lens removal" on page
3.
Press the tabs on the bin media present to remove the sensor from the cover.
4.
Disconnect the cable from the beacon card.
"Finisher or stacker standard output bin LED
A-277.
for the part number.
Repair information
5062
Previous
Next
Go Back
4-257