Adapter Cable For Piko Button; External Odometer; Additional Options; Control Panel Holder - Otto Bock B500 Classic User Instructions

6.11.3 Adapter cable for Piko button

INFORMATION
For additional information on the user-specific adjustment
of this function: see inside front cover.
Power wheelchairs with enAble50 control units can be
equipped with optional two-way adapter cables.
• The connected Piko button can be used to control
power seat functions as well as other functions (see
inside front cover). These functions are specified when
the power wheelchair is ordered.
• Each Piko button switch is programmed with a so-called
toggle function. The selected function is activated as
long as the button is pressed. The selected function is
activated in the opposite direction if the button is
released and pushed again.
• For example, if the power back angle adjustment is
activated, the backrest tilts back as long as the button is
pressed the first time around. Activating this function
again causes the backrest to tilt forward as long as the
button is pressed.

6.11.4 External odometer

The power wheelchair can be equipped with an external
odometer.
It is connected to the control panel guard.
Additional information on using it can be found in the manu­
facturer's instructions for use.
B500 classic/advanced
Fig. 35 External odometer

6.12 Additional options

6.12.1 Control panel holder

Swing-away control panel holder
The manufacturer offers the option of equipping the power
wheelchair with a removable control panel mounted on a
swing-away control panel holder. This control panel holder
makes it possible to drive the power wheelchair under a
table or closer to an object.
The control panel holder can be rotated up to the armrest.
1) Apply slight pressure to push the control panel holder to
the side.
→ The pivot element is unlocked.
Usage
Ottobock | 57