Usage
► Observe the instructions for use in the sections "Power
Seat Functions" > "Control of Power Seat Functions"
and "Joystick and Display Functions".
The power wheelchair can be equipped with a power seat
height adjustment feature. The seat height adjustment fea
ture increases the height of the seat by up to 40 cm, driven
by a motor.
Fig. 20
Seat with raised seat height adjustment feature
The driving function remains available even when the seat is
raised. The speed can be reduced (creep speed) if neces
sary when the seat is raised due to the decreased tipping
resistance. This is indicated on the control panel by the snail
symbol on the LCD display:
42 | Ottobock
Display
Information
Creep speed
6.8.3 Power seat tilt
WARNING
Incorrect seat tilt handling
Falling, tipping over due to user error
► Use the seat tilt feature only with the backrest in the
upright position.
► Drive in street traffic only with the seat tilt lowered.
► When driving with the seat tilt activated, fasten the
belts (lap belt, four-point belt) and do not lean out bey
ond the seat surface.
INFORMATION
► Please also observe the safety instructions in the sec
tion "Power Seat Functions" > "Safety Instructions for
Use".
► Observe the instructions for use in the sections "Power
Seat Functions" > "Control of Power Seat Functions"
and "Joystick and Display Functions".
The power wheelchair can be equipped with a power seat
tilt function. For more information on the specific equipment
of this power wheelchair, contact the qualified personnel.
B500 classic/advanced