Adapter Cable For Piko Or Buddy Button; External Odometer - Otto Bock B500 classc Instructions For Use Manual

Operation

6.11.3 Adapter cable for Piko or Buddy button

INFORMATION
For additional information on user specific adjustment of
this function: see front inside cover.
Power wheelchairs with the enAble50 control unit and
push-button module can be equipped with an optional
2-way adapter cable.
■
The respective connected Piko or Buddy button may be
used to control power seat functions as well as other
functions (see inside front cover). These functions are
specified when the power wheelchair is ordered.
■
The Piko and Buddy button switches are programmed
with a so-called toggle function. The selected function
is activated as long as the button is pressed. The
selected function is activated in the opposite direction if
the button is released and pushed again.
■
For example, if the power back angle adjustment is
activated, the backrest tilts back as long as the button
is pressed the first time around. Activating this function
again causes the backrest to tilt forward as long as the
button is pushed.
Page 62

6.11.4 External odometer

The power wheelchair can be equipped with an external
odometer.
It is connected to the control panel guard.
Additional information on using it can be found in the manu­
facturer's instructions for use.
Fig. 33 External odometer
03/2011 B500 classic/advanced