Otto Bock B500 Classic User Instructions page 12

Delivery
4 Delivery
4.1 Scope of supply
The power wheelchair is normally shipped fully assembled
and fitted to the personal requirements of the respective
user.
The scope of delivery includes:
• Fitted power wheelchair with main components
• Installed options
• Battery charger
• Instructions for Use (user)
4.2 Options
The standard model can be fitted to the user's personal
requirements through a large range of options.
A full list of the available modules and accessories is shown
on the order form and in the accessories catalogue.
To use options: see Page 19 et. seq.
4.2.1 Model B500 classic
The B500 classic power wheelchair can be equipped with
up to 2 of the following power seat options:
• Power seat height adjustment
• Power seat tilt available in 3 different versions (up to
20°, up to 30°, up to 45°)
• Power back angle adjustment up to 30°
• Power adjustable footrests
12 | Ottobock
The wheelchair is controlled by an enAble40 control unit.
4.2.2 Model B500 advanced
The B500 advanced power wheelchair can be equipped
with up to 4 of the following power seat options:
• Power seat height adjustment
• Power seat tilt available in 2 different versions (up to
30°, up to 45°)
• Power back angle adjustment up to 30°
• Power adjustable footrests with 3 programmable ver­
sions (control of only left, only right or both sides)
The wheelchair is controlled by an enAble50 control unit.
For additional information on enabling/user specific adjust­
ment of certain enAble50 control unit functions: see inside
front cover.
4.3 Storage
4.3.1 During daily use
The power wheelchair should always be protected against
external influences.
The control unit must be turned off.
4.3.2 In case of extended disuse
NOTICE
Deep discharge due to standby current
Risk of battery damage
B500 classic/advanced