Otto Bock B500 Classic User Instructions page 73

Fig. 50 Unbuckling the strap
Removing the fuse
1) Open the fuse holder cover (see Fig. 51, item 1).
2) Pull the fuse out of the spring contacts (see Fig. 51,
item 2).
Installing the fuse
1) Remove the fuse from the protective cover.
2) Open the fuse holder cover.
3) Centre the fuse on the spring contacts and insert it.
4) Close the fuse holder cover until you feel it engage.
B500 classic/advanced
Fig. 51 Fuse in the fuse housing
1 Fuse housing with cover
2 Fuse inserted
3 Fuse holder
Closing the battery drawer (in models with drive wheel
suspension)
1) Place the cover on the battery drawer.
2) Close the strap buckle.
3) Push the drawer under the seat until the release bolt
engages.
INFORMATION: As you close the battery drawer,
ensure that the release bolt engages correctly in
the intended notch.
Maintenance/Repair
Ottobock | 73