Headrest - Otto Bock B500 Classic User Instructions

Fig. 30 Releasing/locking the Recaro® seat
1 Release strap
Adjusting the Recaro® seat
INFORMATION
To adjust the back angle of the Recaro® seat: see Page 15.
Adjusting the lateral supports in the lumbar region
INFORMATION
This information only applies to the Recaro® LT model.
1) Turn the knob on the side of the backrest forward.
→ Both lateral supports are moved closer together.
2) Turn the knob on the side of the backrest backwards.
B500 classic/advanced
2 Locking bolts
→ Both lateral supports are moved apart.
Adjusting the pads
The seat surfaces X and W are equipped with a pull-out pad
at the front of the seat bottom. The adjustment lever for the
pad is located below the seat bottom.
1) Pull the pad adjustment lever up and hold it there.
2) Move the pad to the desired position.
3) Release the adjustment lever and let it engage.
→ The adjustment lever is in a safe position if it engages
audibly and has returned to its initial position.
Adjusting the headrest
The height and tilt angle of the headrest are adjustable.

6.10.3 Headrest

The manufacturer offers the option of equipping the stand­
ard and contour seats with a headrest.
The bracket for attaching the headrest mounting kit is
attached with an adapter which is mounted to the back
frame.
INFORMATION
See the manufacturer documentation for information on
attaching the mounting kit.
Usage
Ottobock | 51