Footrests - Otto Bock B500 Classic User Instructions

Usage
Removing the side panel
1) Loosen the wing screw on the side panel holder (see
Fig. 9).
2) Pull the side panel out from the side panel holder and
set it aside.
3) Only for a side panel with a control panel: carefully let
the side panel with the control panel hang down.
INFORMATION: If necessary, the hook-and-loop
closures for routing the control panel cable can be
undone and the control panel can be removed.
Fig. 9 Side panel wing screw
20 | Ottobock
Installing the side panel
1) If necessary, install the control panel and fasten the
hook-and-loop closures for routing the control panel
cable.
2) Insert the side panel into the side panel holder.
3) Re-tighten the wing screw on the side panel holder.

6.2 Footrests

CAUTION
Exposed pinch points
Pinching, crushing of fingers
► Ensure that your fingers are not in the danger area
when flipping the footrests up or down.
Removing the footrests
1) Unhook the calf band.
2) Flip the footplate up.
3) Release the footrest lock (see Fig. 10).
4) Flip the footrest out or in.
5) Pull the footrest up and remove it.
B500 classic/advanced