Control Unit - Otto Bock B500 Classic User Instructions

7) Put the lap belt on when necessary (when driving on the
road).

6.4 Control unit

CAUTION
Uncontrolled driving behaviour due to interference
from electromagnetic fields
Risk of falling, tipping, collision with persons or nearby
objects
► Switch all mobile devices off while driving.
► Turn the control unit off when it is not needed.
The power wheelchair is controlled by an enAble40 or
enAble50 control unit.
Because the control unit is programmable, it can be adap­
ted to the personal requirements of the user; e.g. the speed,
acceleration and deceleration values can all be adapted.
6.4.1 Control Panel
The power wheelchair is operated using the control panel.
The control panel consists of a keypad, an LCD display and
a joystick. The charging/programming receptacle and two
inputs for external buttons are located on the underside.
The control panel is used to switch the power wheelchair on
and off, enter driving commands and display the current
statuses of certain functions and components.
B500 classic/advanced
Fig. 13 enAble50 control panel (identical to: enAble40)
1 Joystick
2 [On/Off] button
3 LCD display
4 [Mode] button
Usage
5 [Warning Flasher On/Off]
button
6 [Horn] button
7 [Direction Indicator
Left/Right] button
8 [Lights On/Off] button
Ottobock | 23