Use
56
Further information can be found in the enclosed instructions for use, "R-Net special controls and environmental
control".
6.14.6 Push-button control
The power wheelchair is equipped with a push-button control module.
The push-button control module lets the user select defined functions (e.g. power seat functions) directly during
normal driving operation.
6.14.7 Adapter cable for Piko button
•
The adapter cable makes it possible to connect Piko buttons for control functions.
•
The Piko buttons, which are connected in pairs, are used to control power seat functions as well as other func
tions (see below). These functions are specified when the power wheelchair is ordered.
•
If e.g. the chin control is connected, the chin control moves to the active position when a button is pressed.
The chin control moves back to the passive position when the second button is pressed.
Available functions
The following functions can be controlled directly with the Piko buttons:
•
Chin control
•
Power seat height adjustment
•
Power back angle adjustment
•
Power seat tilt
•
Combined seat height adjustment/seat tilt
•
Power legrest left
•
Power legrest right
6.14.8 Joystick top
57
68
Possible input modules
•
Micro joystick
•
Multi joystick
•
All-round joystick
•
Sip and puff control
•
Chin control with swivel arm (see fig. 56)
•
Push-button control
•
Piko buttons
The joystick top enlarges the support surface for the
hand, thereby making it easier to operate the input
device.
Juvo