Sensor (Bridge Media Entrance) Removal - Lexmark C950 Service Manual

Slide the decurler clutch away from the machine, and remove it.
10.
Reinstallation note: When replacing the decurler clutch, ensure that the hook on the decurler clutch is
captured by the boss on the bracket.

Sensor (bridge media entrance) removal

Remove the bridge unit assembly. See
1.
Place the bridge unit assembly upside down.
2.
Remove the screw (A) securing the bracket to the bridge unit assembly.
3.
"Bridge unit assembly removal" on page
5058-030
4-229.
Repair information
4-237
Previous
Next
Go Back