HCF feed unit removal
Remove the HCF media tray assembly from the printer. See
1.
page
4-363.
Remove the two screws securing the media feed unit assembly (A) on the front side.
2.
Pull the media feed unit assembly (A) out of the machine in the direction of the arrow.
3.
Note: More force to remove the media feed unit (A) may be required due to the electrical connector inside
the machine.
Guide shaft
HCF left cover removal
Remove the five screws securing the HCF left cover (A) to the unit.
1.
2.
Remove the HCF left cover (A).
A
"HCF media tray assembly removal" on
A
Front
Repair information
5058-030
Previous
Next
Go Back
4-359