Lexmark C950 Moving Manual

Moving guide

Selecting a location for the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel
to lift it safely.
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options,
then leave enough room for them too. It is important to:
•
Setup the printer near a properly grounded and easily accessible electrical outlet.
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156
standard.
•
Provide a flat, sturdy, and stable surface.
•
Keep the printer:
– Away from the direct airflow of air conditioners, heaters, or ventilators
– Free from direct sunlight, humidity extremes, or temperature fluctuations
–
Clean, dry, and free of dust
•
Allow the following recommended amount of space around the printer for proper ventilation:
1 100 mm (4 in.)
2 610 mm (24 in.)
3 385 mm (24 in.)
4 100 mm (4 in.)
5 100 mm (4 in.)

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:
•
Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move
the options must have a surface able to support the dimensions of the options.
• Keep the printer in an upright position.
5
4
3
1
2
Moving guide
Page 1 of 2