Sensor (Booklet Knife Hp) Removal - Lexmark C950 Service Manual

Remove sensor (booklet knife folding) (A).
5.

Sensor (booklet knife HP) removal

Remove the booklet unit assembly. See
1.
Remove the booklet unit assembly left cover. See
2.
page 4-259.
Rotate knife sector gear clockwise until the flag is in the folding sensor position.
3.
4. Remove one screw securing the sensor (knife HP sensor & Knife folding sensor) from the knife frame
assembly.
Connector
Left
A
"Booklet unit chassis removal" on page
"Booklet unit assembly left cover removal" on
5058-030
4-260.
Repair information
4-311
Previous
Next
Go Back