Ttm Tray 3 Feeder Removal - Lexmark C950 Service Manual

5058-030
Remove the two screws (C) securing the TTM lower transport motor to the machine.
4.
Note: When removing the TTM lower transport motor, the drive belt will become detached.
5. Remove the TTM lower transport motor.
Reinstallation note: To correctly set the drive belt tension, install the TTM lower transport motor and the TTM
lower transport motor tension spring before completely tightening the three screws.

TTM tray 3 feeder removal

Remove the TTM tray 3 media tray out from the machine. See
1.
page 4-217.
Pull open, but do not remove, the TTM tray 4 media tray.
2.
Open the left door.
3.
Service Manual
4-214
"TTM tray 3 media tray removal" on
Previous
Next
Go Back