Sensor (Ttm Tray 4 Feedout) Removal - Lexmark C950 Service Manual

Remove the two screws (A) securing the plastic media guide to the machine.
3.
Push the plastic media guide slightly toward the rear and pull it out from the machine.
4.
Release the hooks securing the sensor (TTM tray 3 feedout) to the machine.
5.
Disconnect the cable (B).
6.

Sensor (TTM tray 4 feedout) removal

Remove the TTM tray 4 media feeder. See
1.
2. Disconnect the cable (A).
"TTM tray 4 media feeder removal" on page
5058-030
4-218.
Repair information
4-201
Previous
Next
Go Back