5058-030
Operator panel front cover (SFP)
Open the printer front door.
1.
2.
Remove the two screws (A) securing the plastic cover to the machine.
Slightly lift the operator panel front cover, and remove it from the machine.
3.
Operator panel top cover (SFP) removal
Remove the operator panel front cover. See
1.
2.
Remove the operator panel. See
Remove the operator panel PCBA. See
3.
Service Manual
4-8
"Operator panel front cover (SFP)" on page
"Operator panel assembly (SFP) removal" on page
"Operator panel PCBA (SFP) removal" on page
Previous
Next
Go Back
4-8.
4-123.
4-124.