Default Value
Configuration File Reference
4.3.2.2 LLDP
Enable LLDP
Description
Value Range
Default Value
Configuration File Reference
Packet Interval
Description
Value Range
Default Value
Configuration File Reference
PC VLAN ID
Description
Value Range
Default Value
Configuration File Reference
PC Priority
Description
Value Range
Document Version 2015-12
Auto Negotiation
PHY_MODE_PC (Page 185)
Selects whether to enable or disable the LLDP-MED feature.
Note
•
You should specify "Yes" for only one of "Enable LLDP", or
"Enable VLAN".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "Enable VLAN" >
"Enable LLDP". Therefore, if "Yes" is specified for both
"Enable VLAN" and "Enable LLDP", the VLAN-related
settings are used.
•
Yes
•
No
Yes
LLDP_ENABLE (Page 186)
Specifies the interval, in seconds, between sending each LLDP frame.
1–3600
30
LLDP_INTERVAL (Page 187)
Specifies the VLAN ID for the PC when LLDP is on.
0–4094
0
LLDP_VLAN_ID_PC (Page 187)
Specifies the VLAN Priority for the PC when LLDP is on.
0–7
4.3.2 Ethernet Port Settings
Administrator Guide
83