Lldp Settings; Enable Lldp; Lldp-Med Interval Timer; Cdp Settings - Panasonic KX-UTG200 Administrator's Manual

4.3.4 Ethernet Port Settings
Default Value

4.3.4.2 LLDP Settings

Enable LLDP

Description
Value Range
Default Value
Configuration File Reference

LLDP-MED Interval Timer

Description
Value Range
Default Value
Configuration File Reference

4.3.4.3 CDP Settings

Enable CDP

Description
Value Range
Default Value
Configuration File Reference

CDP Interval timer

Description
90 Administrator Guide
Auto Negotiation
Selects whether to enable or disable sending and receiving LLDP
frames.
Note
•
You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE802.1X".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "IEEE802.1X" >
"VLAN" > "LLDP". Therefore, if "Yes" is specified for both
"VLAN" and "LLDP", the VLAN-related settings are used.
•
Yes
•
No
No
LLDP_ENABLE (Page 246)
Specifies the interval, in seconds, between sending each LLDP frame.
5–3600
30
LLDP_INTERVAL (Page 246)
Enables or disables CDP.
•
Yes
•
No
No
CDP_ENABLE (Page 247)
Specifies the time between CDP messages.
Document Version 2014-05