Leds; Power And Fault Leds; Figure 10: Power Led On An X230 Series Switch - Allied Telesis AT-x230-10GP Installation Manual

LEDs

Power and Fault

LEDs

This section describes the four types of LEDs on x230 Series switches:
"Power and Fault LEDs" on page 25

"10/1000BASE-T/100BASE-TX Link/Activity/Speed LED and PoE

Status LED" on page 27
"SFP LEDs" on page 30

"SD card LED" on page 31

The POWER LED reports the status of AC power and is located on the
front panel of the of the switches beside the console port. See Figure 10.
Note
All port LEDs are OFF when the switch is operating in the low power
mode. To toggle on the LEDs, use the ecofriendly button. See
"Ecofriendly button" on page 33 for more information.
F 10. POWER LED
IGURE
POWER LED
Power LED
AT-x230-10GP, AT-x230-18GP and AT-230-28GP Switches Installation Guide
230 S
ON AN X ERIES
10GP
CONSOLE
ess Label
D
RS-232
S
WITCH
1
SD
FAULT
POWER
2
1000 LINK ACT 10/100 LINK ACT
25