Allied Telesis AT-x230-10GP Installation Manual page 68

Chapter 3: Installation
58
3. Plug the other end of the power cord into a wall outlet.
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.  E3
Pluggable Equipment: The socket outlet shall be installed near the
equipment and shall be easily accessible.  E5
4. Verify that the POWER LED is green. If the LED is OFF, see Chapter
4, "Troubleshooting" on page 67.
The switch is now powered on and ready for network operations. For
information on how to manage the switch, see the following manual:
AlliedWare Plus Software Reference for x230 Series switches
