Table 7 describes the functions of the SFP Link/Activity LEDs
T
SD card LED
x230 Series switches have an SD card LED on the front panel (see
Figure 14)
F
AT-x230-10GP, AT-x230-18GP and AT-230-28GP Switches Installation Guide
7. SFP L
/A
ABLE
INK
CTIVITY
LED
State
Off
SFP
Flashing
green
Steady
green
Note
All of the port LEDs are OFF when the switch is operating in the low
power mode. To toggle on the LEDs, use the ecofriendly button. See
"Ecofriendly button" on page 33 for more information.
14. SD
IGURE
CARD SLOT
SD card LED
ess Label
LED
FUNCTIONAL DESCRIPTIONS
The port on the SFP transceiver has not
established a link with an end node, OR the
ecofriendly feature is enabled
Rx or Tx activities
The SFP transceiver has established a link
with a network device
LED
230 S
ON AN X
10GP
CONSOLE
RS-232
Description
ERIES SWITCH
SD
FAULT
POWER
1000 LINK
ACT
10/100 LINK
1
2
ACT
31