Ecofriendly Button; Figure 15: Ecofriendly Button On An X230 Series Switch - Allied Telesis AT-x230-10GP Installation Manual

Ecofriendly button

By pressing the ecofriendly button you can conserve energy.
When you press the ecofriendly button for 1 to 4 seconds, the front panel
port LEDs are disabled. You may use the button to turn off the LEDs when
you are not monitoring the switch. To turn the port LEDs on, press the
ecofriendly button for 1 to 4 seconds again. Toggling the LEDs does not
affect the network operations of the switch.
F 15.
IGURE ECOFRIENDLY BUTTON ON AN X

ecofriendly button

Note
The ecofriendly button does not control the POWER LED or SD card
LED.
AT-x230-10GP, AT-x230-18GP and AT-230-28GP Switches Installation Guide
230 S
ERIES SWITCH
x230-10G
MAC Address Lab
SD
33