Powering On The Switch; Figure 26: Lifting The Ac Power Cable Hook On An X230 Series Switch; Figure 27: Plugging In The Ac Power Cord On An X230 Series Switch - Allied Telesis AT-x230-10GP Installation Manual

Powering on the switch

AT-x230-10GP, AT-x230-18GP and AT-x230-28GP Switches Installation Guide
To power on the switch, perform the following procedure:
1. Lift the power cable hook, as shown in Figure 26, on the back of the
switch.
F 26. L
IGURE IFTING THE
SWITCH
2. Plug the power cord into the AC power connector, as shown in
Figure 27, on the back of the switch.
F 27. P
IGURE LUGGING IN THE
Power cable
AC
POWER CABLE HOOK ON AN X
Power cable hook
Power cable hook mount
AC
POWER CORD ON AN X
230 S
ERIES
230 S
ERIES SWITCH
57