Connectors And Port Pinouts; Figure 36: Rj45 Connector And Port Pin Layout; Table 15. Mdi Pin Signals (10Base-T Or 100Base-Tx); Table 16. Mdix Pin Signals (10Base-T Or 100Base-Tx) - Allied Telesis AT-x230-10GP Installation Manual

Appendix A: Technical specifications

Connectors and port pinouts

74
This section lists the connectors and connector pinouts.
Figure 36 illustrates the pin layout for an RJ45 connector and port.
F 36. RJ45
IGURE CONNECTOR AND PORT PIN LAYOUT
Table 15 lists the RJ45 pin signals when a twisted pair port is operating in
the MDI configuration.
T 15. MDI
ABLE PIN SIGNALS
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-
Table 16 lists the RJ45 port pin signals when a twisted pair port is
operating in the MDIX configuration.
T 16. MDIX
ABLE PIN SIGNALS
Pin Signal
1 RX+
2 RX-
3 TX+
6 TX-
(10BASE-T 100BASE-TX)
OR
(10BASE-T 100BASE-TX)
OR